4.1 Login Extender
Connect a phone or computer to the EZR13 extender via Wi-Fi. Log in to the extender at the default IP address 192.168.10.1.
4.1.1 - Connect to Extender
i. Wi-Fi Connection
After connected to the electrical outlet, the EZR13 extender will automatically turn on the power. After successfully boots up, you can join-in the Wi-Fi hotspot Extender-WiFi-xxxxxx. The last six characters are the Wi-Fi module's Mac address.
The default Wi-Fi hotspot has no encryption. Connect to this Wi-Fi hotspot on a computer, laptop or smartphone.
ii. LAN Connection
You can also connect a computer on the LAN port of the motherboard to access the Ethernet provided from the extender.
iii. IP Settings
DHCP
The DHCP server is enabled on the EZR13 extender. DHCP is used to dynamically assign the IP address, gateway, domain name server, and other information to the connected devices. Below are the default DHCP settings.
Router Address (Gateway): 192.168.10.1 Subnet Mask: 255.255.255.0 (24) DHCP IP Pool: 192.168.10.100~254 DHCP Lease Time: 12 Hours
If the DHCP function is activated on your device, it will automatically obtain the intranet IP and router IP addresses. Otherwise, you need to configure the IP addresses manually.
Static IP
Configure TCP/IP on your connected devices, make sure IP address is within 192.168.10.100~249. The subnet mask should be 255.255.255.0. The router address should be 192.168.10.1.
On iPhone: Goes to Settings > Wi-Fi > Advanced
On Android phone: Goes to Settings > WLAN > Advanced
On Mac: Goes to System preferences > Network > Wi-Fi > Advanced > TCP/IP
On Windows:
Goes to Start > Control panel > Network and internet > Change adapter setting (on left window panel) > Local area connection > Properties (right click) > TCP/IPv4 (Internet protocol version 4) > Properties > General.
Choose Obtain an IP address automatically and Obtain DNS server address automatically Click OK to exit settings.
Click OK again in the Local area connection properties to apply the new configurations.
4.1.2 Login Extender
After connected your smartphone or computer to the router, open a web browser and type http://192.168.10.1 in the URL address bar. Use default password 🔑root or admin to log in to the EZR13 extender's admin.
If unable to access extender's admin with 192.168.10.1, please clear the cache on the web browser or use the below complete URL path. 🔗http://192.168.10.1/cgi-bin/luci
The default URL prefix is http:// instead of https://.
Last updated
